ASME Section VIII Div 2 Explained: From Theory to Application

ASME Section VIII Div 2 is crucial in designing and making pressure vessels. It’s a part of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, which gives instructions for creating pressure vessels. Read this article on to explore its important elements worth knowing.

What is ASME VIII Div 2?

ASME VIII Div 2, or the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Division 2, is a design-by-analysis approach that requires more detailed calculations than Division 1. It comprises a set of rules and standards guiding the design, fabrication, inspection, and testing of pressure vessels, which are containers holding liquids or gases at a pressure substantially different from the ambient pressure.

What Is The Difference between ASME Section VIII Div 1 and Div 2?

ASME VIII Div 1 and Div 2 are two parts of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, each providing guidelines for designing and constructing pressure vessels. One significant difference between the two lies in the approach to design margins and material allowable stresses.

In Div 2, lower design margins are employed, leading to higher material allowable stresses compared to Div 1. Design margins are reduction factors applied to the material’s ultimate tensile strength (UTS) to establish material allowable stresses as outlined in ASME II-D. This difference in design philosophy reflects varying considerations for safety factors and risk tolerance in the two divisions.

Below is a table highlighting the key differences between ASME Section VIII Division 1 and Division 2:

It’s important to note that the choice between Division 1 and Division 2 depends on the specific requirements of the pressure vessel and the desired level of design complexity. Division 1 is generally more straightforward and widely used, while Division 2 offers more flexibility for specialized applications.

What Is The Allowable Stress for ASME VIII Div 2?

In ASME Section VIII Division 2, the allowable stress is determined by considering various factors such as material properties, design conditions, and safety margins. Unlike Division 1, which provides fixed allowable stress values, Division 2 allows for a more detailed and customized assessment of these factors.

The allowable stress in Division 2 is established through a comprehensive analysis that takes into account the specific characteristics of the pressure vessel, including its geometry, loading conditions, and potential defects. This approach allows for a more precise determination of the allowable stress, tailored to the unique requirements of each vessel.

The ASME Code provides maximum allowable stress values used in calculating a vessel’s wall thickness, which vary with temperature. In Division 1, governing design by Rules with a safety factor of 3.5, a 60,000 psi tensile strength material has a Maximum Allowable Stress Value of 17,142 psi. In Division 2, governing design by Analysis with a lower safety factor of 2.5, the same material’s maximum allowable stress becomes 24,000 psi.

Some companies insist on Division 2 standards for their pressure vessels due to more rigorous requirements, while others may opt for Division 1 or Division 2 based on cost considerations. Typically, manufacturers choose Division 1 for low-pressure vessels and Division 2 for high-pressure ones. The maximum allowable stress values for commonly used steel plates in pressure vessel fabrication are provided in the table for the normal temperature range.

Are There Cost Considerations When Comparing ASME VIII Division 2 to ASME VIII Division 1?

When comparing the costs of ASME VIII Division 1 and Division 2, the key question is whether the savings in materials and labor outweigh the additional expenses in engineering, quality control, and administration.

Traditionally, large and thick vessels have been considered suitable for Division 2. The 2017 Edition of Division 2 introduced Class 1 vessels, providing more flexibility in choosing the more cost-effective Division.

Now, cost reductions are applicable in more scenarios, including carbon steel vessels with volumes over approximately 200 gallons (800 liters) designed for temperatures below 600 degrees F (315 degrees C). Division 2 necessitates fewer reinforcing pads and allows for thinner nozzle forgings, leading to extra cost savings.

In summary, comprehending ASME Section VIII Div 2 is vital if you are a professional involved in pressure vessel design. This division allows for a more detailed and flexible design approach, potentially leading to cost savings due to a lower safety factor.

Your choice between Division 1 and Division 2 depends on specific vessel requirements, complexity preferences, and cost considerations. Learning about Division 2 equips you with informed decisions, ensuring safe and efficient pressure vessel design.

In addition to understanding ASME Section VIII Div 2 you can further enhance your expertise by participating in PetroSync ASME Section VIII Training. Stay ahead in your field, deepen your understanding, and elevate your professional capabilities by enrolling in ASME Section VIII Division 1 and Division 2 training.

Take the next step in advancing your career and contributing to the safety and efficiency of pressure vessel engineering with PetroSync.

Credit header image: iStock

Syafina Firdaus

SEO specialist by day, fact-checker by night. An avid reader and content writer dedicated to delivering accurate and engaging articles through research and credible sources.